What are the reasons for the worm gear screw elevator vibration?


The worm gear screw lift has a large deviation from the pitch, which is generally caused by wear of the drive gear. If it is a multi-end worm, the positional tolerance of the work piece should be measured with the instrument. If the tolerance exceeds the standard, it should be adjusted in time. Procurement of poor quality bearings is often due to non-uniform die-casting of some points. This is a result of impediments to gear movement.

A possible situation with the vibration of the worm gear screw lifter is that the protective cover is too tight when installed, and resonance jitter occurs when the worm gear screw jack moves. When the initial installation is not aligned with the center rectification, direct mounting or the like will cause the worm gear screw jack to shake.

The above is the reason why the vibration of the worm gear screw lifter is more common. Only when the cause is found can the vibration of the worm gear screw lift be solved.

If anyplace you are not clear or you are looking for worm gear screw jacks,just feel free to contact us at china@ludetransmission.com.

评论

发表评论

此博客中的热门博文

Screw Jack Screw Top End Type & Function

图片
Our commonly used worm gear screw lifts have a total of four screw top end types: plain end, top plate, threaded, and clevis end. These four functions are different, and customers can choose different end types according to their actual use. Worm gear screw lifts are divided into two types according to the structural form. Type I namely translating type, above four end types are available, Type II,namely rotating type, only plain end and threaded end are available . The reason why the type II has no top plate type and clevis end type is because for the type II copper nut must be installed. After installation, the flange or clevis end can no longer be installed. Now let’s see the functions of the four types of screw top end: Plain end type, can be installed on the fixed bearing; top plate type, can directly lift the object , but the flange also can be connected with other equipment; Threaded end type, can be connected with other equipment through the thread, us
阅读全文

Electric Linear Actuator for Sluice Gate

图片
The electric linear actuator is a device that converts the rotational motion of an electric motor into linear motion (push or pull movement) and it can be used anywhere a machine pushes or pulls a load, raises or lowers a load, roughly positions a load, or rotates a load. It is has similar function as worm gear screw jack. As we have mentioned in early articles , t he trapezoidal worm gear screw jack can be used for sluice gate. In fact, electric linear actuator can also be used for sluice gate, usually it is light duty gate. The following picture shows l ighter duty Stainless Steel or Aluminum frames and blades using a compact controller system and Linear Actuators . Designed especially for On-Farm canal  and irrigation control, Check and Delivery gates, where the heaviest duty frame and actuator system is not required.
阅读全文

Philippine customer screw jack installation site

图片
  Customized screw jack with a stroke length of 4360mm. Thanks to Philippine customers for providing us with real photos of on-site installation. More details on www.ludetransmission.com . Our company can customize long-stroke screw jack products. If necessary, welcome to consult. We will provide you with products with high quality and competitive price.
阅读全文